THR 40-7215WI

DC/DC Converter THR 40WI Series, 40 Watt • • Reinforced I/O-isolation 3000 VAC • Wide 4:1 input voltage range: 36-160 VDC • Operating temperature range -40 to +80°C • • • Shock and vibration resistance according to EN 61373 UL 62368-1 IEC 62368-1 High efficiency up to 90% The THR 40WI is 40 Watt DC/DC converters series with reinforced isolation (3000 VAC). These regulated DC/DC converters come in either a 2"x1" packProtection against overload, overvoltage age and also feature increased resistance against shock and vibration accordand short circuit ing to EN 61373. High efficiencies up to 90% allow safe operation from –40°C to +70°C (with derating). All models have a wide 4:1 input voltage range and 3-year product warranty precisely regulated, isolated output voltages. With the latest IT safety certifications (IEC/EN/UL 62368-1) the THR 40WI series is the perfect choice for many demanding applications in the industrial, transportation and instrumentation sectors. Models Order Code Input Voltage THR 40-7211WI THR 40-7212WI THR 40-7213WI THR 40-7215WI THR 40-72154WI THR 40-7222WI THR 40-7223WI Output 1 Output 2 Range Vnom Imax 36 - 160 VDC (110 VDC nom.) 5 VDC 12 VDC 15 VDC 24 VDC 54 VDC +12 VDC +15 VDC 8'000 mA 3'330 mA 2'670 mA 1'670 mA 741 mA 1'670 mA 1'330 mA Vnom –12 VDC –15 VDC Efficiency Imax typ. 1'670 mA 1'330 mA 88 % 89 % 89 % 89 % 90 % 89 % 89 % Options THR-HS1 - Optional Heat Sink with Height = 0.25": www.tracopower.com/products/thr-hs1.pdf - Optional Heat Sink with Height = 0.5": www.tracopower.com/products/thr-hs2.pdf on demand (backorder with MOQ - Optional Heat Sink with Height = 1.0": www.tracopower.com/products/thr-hs3.pdf non stocking item) - Optional models with pre-assembled heatsink www.tracopower.com September 20, 2023 Page 1 / 5 THR 40WI Series, 40 Watt Input Specifications Input Current 40 mA typ. 409 mA typ. 170 VDC max. (100 ms max.) 30 VDC min. / 33 VDC typ. / 35.5 VDC max. 2'500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type - At no load - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter Output Specifications Output Voltage Adjustment See application note: Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Voltage Balance (symmetrical load) - single output - dual output - single output - dual output Capacitive Load - single output - dual output single output models: dual output models: single output models: dual output models: dual output models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 54 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 54 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 54 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Overvoltage Protection Transient Response - Response Deviation - Response Time –15% to +5% (54 Vout model) ±10% (other models) (single output models only) (By external trim resistor) www.tracopower.com/overview/thr40wi Output power must not exceed rated power! ±1% max. 0.2% max. 0.2% max. 0.5% max. 1% max. (Output 1) 1% max. (Output 2) 2% max. 75 mVp-p typ. (w/ 1 µF, 100 V MLCC) 125 mVp-p typ. (w/ 1 µF, 100 V MLCC) 125 mVp-p typ. (w/ 1 µF, 100 V MLCC) 150 mVp-p typ. (w/ 1 µF, 100 V MLCC) 250 mVp-p typ. (w/ 1 µF, 100 V MLCC) 125 / 125 mVp-p typ. (w/ 1 µF, 100 V MLCC) 125 / 125 mVp-p typ. (w/ 1 µF, 100 V MLCC) 85 mVp-p max. (w/ 1 µF, 100 V MLCC) 140 mVp-p max. (w/ 1 µF, 100 V MLCC) 140 mVp-p max. (w/ 1 µF, 100 V MLCC) 170 mVp-p max. (w/ 1 µF, 100 V MLCC) 280 mVp-p max. (w/ 1 µF, 100 V MLCC) 140 / 140 mVp-p max. (w/ 1 µF, 100 V MLCC) 140 / 140 mVp-p max. (w/ 1 µF, 100 V MLCC) 13'600 µF max. 2'400 µF max. 1'500 µF max. 600 µF max. 130 µF max. 1'200 / 1'200 µF max. 750 / 750 µF max. Not required ±0.02 %/K max. 30 ms typ. / 100 ms max. Continuous, Automatic recovery 110 - 185% of Iout max. 150% typ. of Iout max. 125% typ. of Vout nom. 3% typ. / 5% max. (75% to 100% Load Step) 250 µs typ. (75% to 100% Load Step) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 THR 40WI Series, 40 Watt Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/thr40wi PD 2 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55032 class A (with external filter) EN 55032 class B (with external filter) FCC Part 15 class A (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) FCC Part 15 class A (with external filter) www.tracopower.com/overview/thr40wi EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A www.tracopower.com/overview/thr40wi EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges - Operating Temperature Power Derating - Case Temperature - Storage Temperature - High Temperature Over Temperature Protection Switch Off - Protection Mode - Measurement Point Cooling System Remote Control - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 60 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF 95% max. (non condensing) –40°C to +70°C –40°C to +80°C (with Heat Sink) +105°C max. –50°C to +125°C Depending on model See application note: www.tracopower.com/overview/thr40wi 115°C typ. (Automatic recovery at 100°C typ.) Case Natural convection (20 LFM) On: 3.5 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 2.5 mA typ. -0.5 to 0.5 mA 4'000 m max. 220 - 310 kHz (PWM) 265 kHz typ. (PWM) Reinforced Insulation 250 VAC 3'000 VAC 1'500 VAC 1'500 VAC 1'000 MΩ min. 1'500 pF typ. 900'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 THR 40WI Series, 40 Watt Environment - Vibration - Mechanical Shock EN 61373 EN 61373 Plastic base-plate w. metal case Non-conductive FR4 (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) 2" x 1" Lead-Free Wave Soldering 260°C / 10 s max. 51.5 g - Case to Ambient 12 K/W typ. (without Heatsink) 10.9 K/W typ. (with Heatsink THR-HS1) 9.3 K/W typ. (with Heatsink THR-HS2) 8.9 K/W typ. (with Heatsink THR-HS3) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) fda9a647-5082-4f8d-8a9d-c1c4a64790fb Housing Material Base Material Isolation Frame Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/thr40wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 THR 40WI Series, 40 Watt Outline Dimensions 5.08 5.1 10.16 (0.4) 3 2 Pinout (0.2) (0.2) 1 3.3 (0.13) 1.9 (2.00) (1.8) Bottom View 50.8 45.72 (0.07) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 Remote On/Off Remote On/Off 4 +Vout +Vout 5 –Vout Common 6 Trim –Vout Ø1.0 (Ø0.04) 6 5 4 10.16 10.16 2.5 (0.4) (0.4) (0.1) 25.40 6.0 11.0 (1.00) (0.24) (0.43) Dimensions in mm (inch) Tolerances: x.x ±0.75 (±0.03) x.xx ±0.25 (±0.01) Pin diameter ±0.05 (±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5